5650 pillar gasket packing
The PILAR TECHNOGRAPH (R) SEAT Rubber Gasket is a non-asbestos era gasket seat manufacture that has increased heat resistance and handling performance. Features Æ excellent heat resistance This seat gasket uses chemically stable graphite for the main constituent material, which persists the problem of heat resistance in high temperature steam conditions, which has become a problem in conventional non-asbestos seat gaskets where synthetic rubber has a lot of content. Æ excellent handling performance Because this is a gasket that graphite is reinforced by a small amount of high strength fiber, provides high flexibility and adequate surface hardness, and has no fear of scars, etc. during handling. Æ excellent execution performance Because special coatings (for attachment prevention) are run on the surface, it is possible to remove the gasket easily after use. Performance - Temperature -100 - + 260 ° C - 5.2MPa pressure (class 300) - Minimum tightening design pressure (y) 2, 75 - Minimum tightening design pressure (y) 25.5N / mm2 (for water, steam) - Tightening pressure Minimum (Y) 39, 2 N / mm2 (for gas) Note-1: The performance value shows the representative value for the gasket seat having a thickness of 1.5mm. Note-2: The minimum pressure tightening (Y) shows the minimum tightening pressure to be applied to the gasket area contacting. Note-3: The minimum gasket width is 5m